Version 1.3 has been released and can now be found in the filebase:
We have a guide available that helps with troubleshooting glass collisions: Troubleshooting Glass Collisions
Normally, all that's necessary is to set the ID and attributes in polygon mode and add the user defined options to the collision object and the glass materials.
Cartres and I have been experimenting with further modifications for a more realistic bloom. Currently released settings with default bloom on the left, my changed settings on the right:
I was asked about making a version with steady burns as well, so like with the unmarked CVPI with the Talons, I've decided to make a separate California inspired version as well. For this version, I've changed the skin to Paleto Bay, added the passenger side spotlight, added steady burns and rear amber:
The original generic version is currently still in testing, I've worked on it some and it'll likely still take a few more days until it'll be ready for release.
It has now been released:
Additional all blue, all red and NY inspired color options are included:
I have also made a separate version with a California inspired light color and pattern setup and with an additional passenger side spotlight extra component instead of the pushbar and radars:
I've added antennas and made some further adjustments to the clear lens textures of the lightbar. The car should now be complete, if no issues are found, it should be ready for release in the next week or two.
Update 2022-06-21
The Paleto Bay version has been released:
Update 2022-06-20
The LSPD version has been released:
I've recently started working on another simple project to match the unmarked CVPI, featuring Kane104's Whelen Liberty lightbar. It may look familiar for some of you, as it is inspired by some of my old mods for GTA IV, including my most popular mod ever and the planned update that I never managed to complete.
I've decided to keep the setup very basic, I'm not planning to add any more equipment at this point, however I may make another version in the future. Pushbar, grill lights and radar are extras, as are the lightbar lenses, to allow choosing between colored and clear lenses.
The car is going to support DLS, however I haven't decided on light stage 1 and 2 yet. I'm open for any ideas.
More screenshots and a video of what's likely the final BCSO CVPI. It will most likely be released very soon.
Edit: Now released:
Promoting paid modifications and handling any commercial activities is against our terms of use.
I've finished the siren speaker and controller. The car should be almost ready and will likely be released soon.
With the addition of Kane104's radar (set up as extra_ten, like on the Caprice), the BCSO CVPI is now complete. It is currently in beta testing and will be released when I'm confident that there are no more issues.
Update: Now released:
I've recently started working on a (hopefully) quick and simple project, an unmarked 2008 Ford Crown Victoria, featuring Hanako's CVPI base and Kane104's Talons:
Most of the equipment is set up as extras, it is possible to use for example it as a detective vehicle with minimal equipment, or as an unmarked traffic patrol car with a laptop, radars, a partition and a pushbar.
I'm currently working on a Whelen SA315P siren and Cencom Gold controller.
I've added settings for VisualVanilla in the first post.
I've finished the PB400, but unlike originally planned, I've modeled one from scratch. All the new equipment for the marked BCSO CVPI is now completed, but there are still many small changes and improvements left before it'll be ready.
I've made a partition and an updated version of the gun mount I used for the Caprice. In addition to Kane104's M4 rifle I've also added my Remington 870 shotgun. The only part missing now is the Setina PB400 pushbar, I'm currently planning to update an older model made by Ridgerunner as I did with his Caprice pushbar.
Hi. Will you be making models for Fivem in the future?
My mods can be used in FiveM, but as I personally don't use it, they won't be set up for it.
I've finished the controllers:
I've added antennas and spotlights, I will work on the Mastercom and ArrowStik controllers next.
It's been a while since the last update, as I haven't spent a lot of time modding recently. Still, I have some news about the interior equipment. I have finished the Toughbook CF-30, the older version of the Arbitrator dashcam and a console.
